Email article Save article

Change my system access codes

In addition to the Master Access Code, you can program up to 32 additional user access codes. This can be helpful in letting you know who is accessing
your system (relatives, caregivers, cleaners, etc.).

To add additonal codes

  1. Press * + 5 + your master code.
  2. The display will show Enter Code 01.
  3. Enter the access code to be programmed or use the <> keys to scroll and * to select.
  4. Enter the new 4-digit access code.
  5. Press # to exit, or enter another two-digit code to program.
  6. If you wish to assign a name to the user access code:
    •  Log in to the web portal.
    • Under the System tab select Access Codes
    • Edit the 2-digit user access code.

To delete a code

  1. Press * + 5 + your master code.
  2. The display will show Enter Code 01.
  3. Enter the 2-digit user access code to be deleted or use the < > keys to scroll and * to select.
  4. Enter * to delete.
  5. Enter # to exit.