Save article

Install your Bluetooth Remote Kit

For the installation, you will need the Bluetooth remote kit, which includes the Bluetooth Slim remote and an adapter (also called a Bluetooth receiver), and the Fibe TV receiver must be connected to your TV set.

Reminder: Remember to insert the batteries provided into the back of your remote.

  1. Plug the Bluetooth adapter into the USB port on the front of your Fibe TV receiver.

  2. Press the SELECT button while pointing the remote towards the Bluetooth adapter. Wait 30 seconds for the pairing process to complete.

    Note: Ensure there is a clear line of sight between the remote and the Bluetooth adapter.

  3. Press any button on the remote. If the Bell light on the remote is flashing red, you have successfully paired your remote.

    Note: If the Bell light flashes green, repeat steps 2 and 3.

Once youʼve installed the Bluetooth remote kit, follow the steps in Program the Bluetooth Remote Kit to control your TV.