Devices connected to the guest Wi-Fi network can only connect to the Internet. Before you can enable the guest network, the primary network must be on.
- Open your web browser and visit bell.ca/mymodem or 192.168.2.1.
- Click on Manage my Wi-Fi.
- If prompted, enter the administrator password
- Unless you’ve changed it, the password is the serial number located on the sticker on the back of the modem.
- Ensure the Guest Wi-Fi network is set to the ON position.
- If you want, you can change the Network name and Password to something easier to remember.
Tip: You can add the word "guest" to the network name to distinguish it from your primary network.
- Click Save.