Save article

Move my receiver to a new location using coaxial cable

  1. Unscrew the coaxial cable from the back your TV. Leave the coaxial cable screwed into the receiver.
  2. Unplug the power cord for the Fibe receiver.
  3. Bring your receiver to the new location.
  4. Plug in the receiver's power cord.
  5. Connect the coaxial cable to the Video In port on your TV.
    • Note: Depending on your model, this port may also be labelled VHF / UHF, Antenna / Cable In, IN, or TV IN
  6. The receiver should be connected as shown in the diagram below.Coax Cable: Direct from Set Top Box to TV