Save article

Move my receiver to a new location using composite audio & video cables

  1. Unplug the composite audio & video cables from the back your TV. Leave the other end of the cables plugged into the receiver.
  2. Unplug the power cord for the Fibe receiver.
  3. Bring your receiver to the new location.
  4. Plug in the receiver's power cord.
  5. Connect the composite audio & video cables to the Audio In and Video In ports on your TV.
    • Note: The cables are colour coded and go into the ports that match (yellow, red and white).
  6. The receiver should be connected as shown in the diagram below.Composite Cables: Direct from Set Top Box to TV