Save article

Move my receiver to a new location using S-Video and composite cables

  1. Unplug the S-Video and composite cables from the back your TV. Leave the other ends of the cables plugged into the receiver.
  2. Unplug the power cord for the Fibe receiver.
  3. Bring your receiver to the new location.
  4. Plug in the receiver's power cord.
  5. Connect the S-Video cable to the S-Video port on your TV.
  6. Connect the red and white composite audio cable to the Audio In ports on your TV. Leave the yellow cable unattached.
    • Note: The cables are colour coded and go into the ports that match (yellow, red and white).
  7. The receiver should be connected as shown in the diagram below.Composite Cables: Direct from Set Top Box to TV