- Turn on your TV.
- Turn on your Fibe TV receiver.
- Point your Fibe TV remote at your receiver.
-
Press the STB button on the remote.
-
Press and hold the SETUP button until the STB button blinks twice.
-
Press the TV button on the remote.
-
Press and hold the OK button until your TV turns off.
-
If your TV has not turned off:
- Test whether programming was successful by pressing the POWER button on your Fibe TV remote, and
- If your TV does not turn off, try programming your remote with the direct-code-entry method or popular-brand method.
- From the list below, indentify the 1-digit code for your TV brand. If your brand is not listed, try programming your remote with the code-search method or direct-code-entry method.
TV brand 1-digit code Insignia / Dynex 1 LG 2 Mitsubishi 3 Panasonic 4 Phillips / Magnavox 5 Samsung 6 Sharp 7 Sony 8 Toshiba 9 Vizio 0 - Turn on your TV.
- Turn on your Fibe TV receiver.
- Point your Fibe TV remote at your receiver.
-
Press the STB button on your Fibe TV remote.
-
Press and hold the SETUP button until the STB button blinks twice.
-
Press the TV button.
-
Enter the 1-digit code from the table above using your remote’s number buttons.
-
If programming is successful, your TV turns off and the remote's TV button will blink twice.
- If your TV does not turn off, try programming your remote with the direct-code entry method or popular-brand method.
- Locate the 4-digit codes for your TV brand from the Motorola MXv4 remote 4-digit code list. If your brand is not listed, try programming your remote with the code search method or popular brand method.
- Turn on your TV.
- Turn on your Fibe TV receiver.
- Point your Fibe TV remote at your receiver.
-
Press the TV button on your Fibe TV remote.
-
Press and hold the SETUP button until the TV button blinks twice.
-
Enter the first 4-digit code you located for your TV brand using your remote’s number buttons.
-
Press the POWER button on your Fibe TV remote. If programming has been successful, your TV and receiver will turn off.
- If your TV does not turn off, repeat step 7 and 8 for the each 4-digit code listed for your TV brand.