Save article

Program my Motorola VIR140

  1. Identify and note the 4-digit codes for your TV brand from the Motorola VIR 140 remote 4-digit code list brand is not listed, try programming your remote with the code search method.
  2. Turn on your TV.
  3. Turn on your Fibe TV receiver.
  4. Point your Fibe TV remote at the receiver.
  5. Press the TV button on the remote.
  6. Press and hold down the TV button on the remote and press the OK button. Release both buttons together.
  7. The STB, TV, DVD and AUX buttons blink twice and then TV button stays lit.
  8. Use the number button to enter the first 4-digit code that you previously identified for your TV brand. The TV button will blink for each number you enter.
  9. If programming is successful, the TV button will blink 3 times.
  10. Press the POWER button the remote. If programming is successful, your TV and receiver will turn off.
  11. If your TV does not turn off, repeat step 7 and 8 for the each 4-digit code listed for your TV brand.