Save article

Create access controls on my Home Hub 2000 modem

  1. To access your modem settings, open a web browser, type (or in the address bar and then press Enter

  2. Click on Access control.

  3. Enter the administrator password. Unless you have changed it, the default password is "admin".

  4. Click on the device you wish to set restrictions for. 

  5. Devices currently connected to your network are displayed. If you do not see the desired device in the list, click the Show All tab. 

  6. Turn ON Access control for the device you selected.

  7. Under Block device, select ALWAYS to block Internet access to the device until you unblock it. Select SCHEDULED to select specific days and times to block access.

  8. If you selected SCHEDULED, click on a block of time to select it; click it again to deselect the block of time.

  9. Click Save when you are done.