Configure the guest Wi-Fi network on my Home Hub 2000 modem

To access your modem settings, open a web browser, type Type bell.ca/homehub (or 192.168.2.1) in the address bar and then press Enter.
Click on the Wi-Fi settings.
If prompted, enter the administrator password. Unless you have changed it, the default password is "admin".
Go to the Guest tab.
Ensure the Guest Wi-Fi network is set to ON.
If you want, you can change the network name and password to something easier to remember.
Tip: you can add the word "guest" to the network name to distinguish it from your primary network.
Click Save to save your changes.

SupportInternet & email