SupportInternet & email

Devices connected to the guest Wi-Fi network can only connect to the Internet. Before you can enable the guest network, the primary network must be on.

1. Open your web browser and visit bell.ca/mymodem or 192.168.2.1.
2. Click on Manage my Wi-Fi.
3. If prompted, enter the administrator password
   • Unless you’ve changed it, the password is the serial number located on the sticker on the back of the modem.
4. Ensure the Guest Wi-Fi network is set to the ON position.
5. If you want, you can change the Network name and Password to something easier to remember.
   
   

   Tip: You can add the word "guest" to the network name to distinguish it from your primary network.

6. Click Save.