Save article

Use WPS to connect devices to my Wi-Fi network on my Home Hub 3000

If your computer or wireless device has a Wi-Fi Protected Setup (WPS) button, you can connect it to your primary Wi-Fi network quickly, without entering your Wi-Fi password.

If the device does not support WPS, you will have to configure the Wi-Fi settings manually. 

To use WPS to connect your devices:

  1. Turn on your computer or wireless device.
  2. Press the WPS button on your modem.

    You will have 2 minutes to connect your Wi-Fi device. If you do not complete the process in time you will need to restart this step.

  3. Press and hold the WPS button on your computer or Wi-Fi device for 5 seconds. The password for your primary Wi-Fi network will automatically load into the device and connect to the network.